Industry’s first* nipper for metal wires
Nipper exclusively for flat-cutting metal wires from 0.042 mm to 2 mm dia.
■Double-edged nippers dedicated to metal wires, targeting metal wires used in model building and brass wires of 2 mm in dia.
The cut surface is neat and flat, not crushed, as is often with general metal wire nippers!
This single tool is widely applicable for various types of metal wires in modeling.
■Clean cutting surfaces and short finishing time
The nipper cuts metal wires as flat as possible without crushing, eliminating the possibility of crushing and bulging, resulting in changes to the shaft diameter.
This tool is applicable for cutting various sizes of metal wire, from #0.02 (0.042mm) metal wire to 2mm dia. brass wire!
GodHand’s original blade attachment technology, ‘Hybrid Edge,’ is adopted.
The blade section has two cutting edges, one on the tip side and the other on the root side, viewed from the center, enabling this single tool to cut wires ranging from ultrafine to 2 mm dia.
Perfect for cutting wire < 0.5 mm on the tip side and 0.5 mm to 2 mm on the root side. Cutting edges to make the cutting surface as flat as possible on the target wire rod It enables cutting with less force than other nippers of the same size (compared to our products). Each nipper is handmade by experienced blade sharpeners. *As of April 2020, according to our research.
