Description
THIS IS A HOBBY ALLEY EXCLUSIVE SET ALTERNATIVE TO OUR NIPPERSET ULTIMA. BASICALLY, THIS IS GODHAND'S GH-SG-02 PLASTIC MODEL STARTER TOOLSET BUNDLED WITH GH-SPN-120 ULTIMATE NIPPER!!!
A complete set of tools with a convenient storage case!
SPECIAL BUNDLE SET CONTAINS:
・GH-SPN-120 Ultimate Nipper x 1
・All-Purpose Nipper (same as PN-125) x 1
・Metal file x 1
・Kamiyasu! 5mm thick 240, 400, 600, 800, 1000 grits, 1 sheet each
・Tweezers x 1
・Cloth storage case x 1
⚠Notes
-For safety, please wear protective glasses.
-Store in the case out of reach of small children.
Nippers
・Do not apply a load beyond the capacity. Be especially careful not to apply a load to the tip.
- There is a risk that cut pieces may fly, so make sure there are no people around and no fragile objects before starting work.
- Do not touch the cutting edge directly with your hands. - To prevent rust, wipe off any dirt or fingerprints and apply oil to the shaft and cutting edge.
●Metal files
・For use on plastic only. Do not use on metal.
- To prevent clogging, be sure to remove cutting dust frequently.
・If you file with too much force, the cutting surface will easily become distorted. Please file with light force.
- Do not use a metal brush to remove shavings. This will damage the file's grain and reduce its cutting power.
- If the clogging is severe, soak the metal part in a solvent such as tool cleaner to dissolve and remove the clogging material.
- Because it is made of iron, it is prone to rust. Rust reduces cutting power, so we recommend periodic maintenance by applying anti-rust oil.
●Kami Yasu
- If left submerged in water for a long time or exposed to solvents such as lacquer, the adhesive may dissolve and peel off.
- When using, please wear protective glasses and a dust mask.
-Scratches and dirt on the surface of the sandpaper do not affect its use.
- If you use too much force, the ink may come off.
Tweezers
・The tip is sharp and dangerous. Please handle with care and we recommend that you attach a cap when storing.
- This is a tool used for handling parts. Do not use it for any other purpose.
- Do not touch the tip directly.
